当前的位置是:首页 > 产品中心 > 配套产品系列
数据远传-无线
数据远传-无线
数据远传-无线
产品简述:
产品定义Product Definition阴极保护数据远传器是利用物联网技术,将阴极保护设备各项运行参数通过无线传输模块发送至服务器,经过数据处理与分配,用户可通过阴极保护管控平台进行数据查看、统计分析、远程控制等操作,从而实现阴极保护设备的远传远控功能。The cathodic protection data remote transmitter uses IoT technology to send various operating parameters of cathodic protection equipment to the server through the wir..

自主研发
品质无忧
售后完善
产品目录
镁合金牺牲阳极系列
铝合金牺牲阳极系列
锌合金牺牲阳极系列
外加电流系列
配套产品系列
半连续铸造系列
挤压型材系列
智能测试桩
带状牺牲阳极系列
管道安装辅助产品系列
详情介绍

产品定义

Product Definition

阴极保护数据远传器是利用物联网技术,将阴极保护设备各项运行参数通过无线传输模块发送至服务器,经过数据处理与分配,用户可通过阴极保护管控平台进行数据查看、统计分析、远程控制等操作,从而实现阴极保护设备的远传远控功能。

The cathodic protection data remote transmitter uses IoT technology to send various operating parameters of cathodic protection equipment to the server through the wireless transmission module. After data processing and distribution, users can perform operations such as data viewing, statistical analysis and remote control through the cathodic protection management and control platform, thereby realizing the remote transmission and control function of cathodic protection equipment.

技术参数

Technical Parameters

1、运行条件

1. Operating Conditions

环境温度:-15至+45°C

Ambient Temperature: -15 to +45°C

相对湿度:15%至90%

Relative Humidity: 15% to 90%

大气压力:86KPa至106Pa

Atmospheric Pressure: 86KPa to 106Pa

2、供电电源

2. Power Supply

AC220V,50HZ(如有其他供电电源等级,可定制)

AC220V, 50HZ (Customizable for other power supply levels)

3、数据采集与发送内容

3. Data Collection and Transmission Content

输出电压、输出电流、给定电位、参比电位、工作模式等信息

Output voltage, output current, given potential, reference potential, working mode and other information

4、发送模式

4. Transmission Modes

定时发送:具有5分钟~24小时的测量周期,测量周期可远程设置,实时数据上传完整率达到100%

Timed Transmission: Measurement cycle of 5 minutes ~ 24 hours, the measurement cycle can be set remotely, and the complete rate of real-time data upload reaches 100%

触发监测:可实现触发报警电压设置,超过报警值后启动连续测量,报警消除后恢复定时测量。报警时设备应处于在线状态,监测数据频次不小于5秒每条

Triggered Monitoring: Trigger alarm voltage setting can be realized. Continuous measurement is started when the alarm value is exceeded, and timed measurement is restored after the alarm is eliminated. The device should be online when alarming, and the frequency of monitoring data is not less than 5 seconds per piece

5、无线数据通讯

5. Wireless Data Communication

通讯方式:GPRS/4G无线通讯,通讯协议TCP/IP

Communication Method: GPRS/4G wireless communication, communication protocol TCP/IP

6、安全性要求

6. Safety Requirements

防雷:设备满足GB/T3482中第四级防雷的要求

Lightning Protection: The equipment meets the requirements of Level 4 lightning protection in GB/T3482

防水:设计符合GB4208中IP67的要求(可按要求定制不同防护等级的外壳)

Waterproof: Designed to meet the requirements of IP67 in GB4208 (Customizable shell with different protection levels as required)

7、配套系统平台

7. Supporting System Platform

配套阴极保护智能管控平台:提供地图浏览、数据查询、报警分析、数据统计等功能

Supporting Cathodic Protection Intelligent Management and Control Platform: Provides functions such as map browsing, data query, alarm analysis, data statistics, etc.

8、远程控制功能

8. Remote Control Function

通过远程控制可对采集仪的安装档案、采集频率、工作模式、断电间隔、触发报警限值进行设置

Through remote control, the installation file, collection frequency, working mode, power-off interval and trigger alarm limit of the collector can be set


推荐产品
版权所有 CopyRight © 2020 焦作市镁资防腐材料有限公司  豫ICP备2023023617号-1豫公网安备41082302411025号
电话
13403991777
二维码

扫码手机浏览